The working characteristics and adaptability of high speed disperser

- Jul 04, 2018 -

In the process of making the high speed dispersers, they mainly adopts various kinds of specifications such as electromagnetic speed regulation, three speed and frequency conversion speed regulation. In the operation, it operates steadily and forcefully, to a certain extent, it is suitable for various kinds of viscosity, high speed dispersing machine of the two kinds of lifting what are the hydraulic and mechanical types. To a certain extent, the general and explosion-proof configuration is safe and reliable, and the operation and maintenance are simple.

The high speed dispersing machine has a strong continuous production and can quickly disperse and dissolve the material to a certain extent. It has good dispersing effect and high production efficiency when it is used, and the whole equipment runs smoothly, and it is easy to install. There are different power and types for viscosity and treatment capacity of different materials.


The working characteristics of high speed disperser

1. the strong centrifugal force of the high speed disperser will throw the material from the radial to the precise gap between the rotors, at the same time, it is subjected to the centrifugal force, the friction of the liquid layer, the hydraulic impact and so on. The material is initially dispersed.


2. the rotating rotor of the high speed disperser will produce at least 15m/s above the line speed to a certain extent. The material is fully dispersed and broken under the effect of strong hydraulic shear, liquid layer friction, tearing collision and so on. At the same time, the material can be ejected at high speed through the stator slot.


3. the high speed dispersing machine will be ejected from the radial speed to a certain extent, changing the flow direction under the resistance of the material and the wall of the container. At the same time, under the action of the upper and lower axial suction force produced by the rotor region, the upper and lower two strands of strong turbulent flow are formed. After several cycles, the material will eventually complete the dispersion process.


Adaptability of high speed disperser

  1. high speed disperser in a certain degree of the medium temperature different specifications

    of the product, otherwise the coil will burn out, so the seal will aging, then it will seriously affect its service life to a certain extent.


2. the medium viscosity of the high speed disperser is usually below 50cSt when it is operated. If it exceeds this value, the path is greater than 15mm, and the ZDF series multi function disperser is used as a special order. The diameter is less than 15mm and the high viscosity dispersing machine is set.


http://www.wxhtshen.com/