Mechanical seal and mirror polishing of the double stirred reactor

- Jul 20, 2018-

In the process of making the double mixing reactor, the main components of the production process are three parts of the tank, the tank, the jacket and the mixing system. In the process of operation, 304 or 316L and other high quality stainless steels are used in contact with the material, which conforms to the GMP standard. The mixing form should be mixed with frame type to ensure that the material is evenly distributed in a short time. At the same time, frame type, anchor type and slurry type can be selected according to the needs.

The seal of the double stirred reactor adopts its sanitary mechanical seal. It can effectively guarantee the pressure in the tank and prevent the leakage of the material in the tank. The whole equipment uses its interface to use the ISO standard fast clamping hoop type, which is convenient and hygienic

The inner surface of the double stirred reactor is polished with its mirror surface so that the dead angle can be ensured. The whole device is completely closed to ensure that the material is always in the aseptic state, and the outer surface can be treated with sand spraying, dull polish and Cold rolled primary color matt. Heating and cooling: the heating method can choose optional steam, electric heating and heat conduction oil to meet the needs of acid, alkali resistance, high temperature resistance, abrasion resistance, corrosion resistance and other working environment.